This should work if you have no neutral available. Hot + Hot in the US will give you the same as Hot + Neutral in Europe.
- Thanks Michael, I have two other questions.
- 1) what guage wire do you recommend for the PID s
- to the XLR connectors. Is 22 ga to small?
- 2) Did you connect 2 10ga wires from the HLT SSR to the Main contactor the other to the Boil SSR ?
1) 22 AWG is correct for the XLR connectors.
2) I think the image will answer that...
let me know if you have more questions...
Yes it does. Just have not received parts yet and wasnt sure if there was enough room for two connections on the ssr
Thanks
@michael Just interested in the first step wiring to the panel switch. I am in Australia and we have 240V with Active, Neutral and Earth. We don't have a Hot 1 and Hot 2 which first diagram shows wiring into the switch. Should I just wire this as Active and Neutral into the switch instead?
@gattica76 it should work if you follow the diagram at the start of this conversation. 1 Hot, 1 Neutral and the ground.
I am assuming the above diagram would be used for 110v systems as well? I am using 1650 watt elements so only 110v is needed.
